Planning The Installation; Emc Installation Guidelines - Raymarine RL70C Owner's Handbook Manual

142
For full functionality of the radar and chartplotter you need to provide position
and heading data.
• Heading data enables the radar and chart to operate in North Up and Course
Up modes. If speed data is also available the MOB function operates.
• Position data is required for full functionality of the chart display.
Full details of heading, position and other data are given in Section 8.8
Integrated Systems.
The remaining sections of this chapter cover the following topics:
• Unpacking and Inspecting the Components
• Location of the Display Unit
• Cable Runs
• Mounting the Display Unit
• Display Unit Connections
• Radar System Tests and Post Installation Alignment
• Integrated Systems
• Integrated System Checks

Planning the Installation

Before you install your display unit, you should spend some time planning the
installation, giving consideration to:
• Siting the display unit, as described in Section 8.3 Selecting the Display Unit
Site.
• Cable Runs, including cables for an integrated system (to provide heading
and position data etc.), as described in Section 8.4 Cable Runs.

EMC Installation Guidelines

All Raytheon equipment and accessories are designed to the best industry
standards for use in the leisure marine environment.
Their design and manufacture conforms to the appropriate Electromagnetic
Compatibility (EMC) standards, but correct installation is required to ensure
that performance is not compromised. Although every effort has been taken to
ensure that they will perform under all conditions, it is important to understand
what factors could affect the operation of the product.
For optimum EMC performance it is recommended that:
HSB Series LCD Display