Units Setup; Setting Units; Waypoint Identity; Select Nmea Or Auxiliary Alarm - Raymarine ST60 Owner's Handbook Manual

Chapter 4: Calibration

Units setup

You can use the Units Setup screen to set:
• Temperature (TEMP) units to either °C or °F.
• Speed (SPD) units to either knots (KTS), kilometers per hour (KMH) or miles
per hour (MPH).
• TRIP distance units to either nautical miles (NM), kilometers (KM) or statute
miles (SM).
• DEPTH units to either feet (FT), fathoms (FA) or meters (M).
• WIND speed units to either knots (KTS) or meters per second (M/S).

Setting units

With the Units Setup screen displayed, use the
turn and for each, use the

Waypoint identity

Determines whether waypoints are identified by name (WP NAME) or by number
(WP NO).

Select NMEA or auxiliary alarm

If the ST60 Multi is connected to NMEA, select ON. If the Auxiliary Alarm option is
fitted select OFF, to enable the Auxiliary Alarm.

Auxiliary alarm enable

If the Auxiliary Alarm option is fitted, use this screen to determine which alarms
you want to sound at the Auxiliary Alarm. The screen heading shows which alarm
you are setting, and when you have set one alarm, press the
set the next alarm.
ON = alarm enabled, OFF = alarm disabled.
The screen titles and associated alarms are displayed in the following sequence:
Title
SHALLOW
DEEP ALM
ANCHOR
WIND ALM
or
track reset
Alarm function
Shallow alarm
Deep alarm
Anchor alarm
High true wind speed
key to display each data type in
key to select the required unit.
31
key to display and