Advancing To A Waypoint; Restart Cross Track Error (Xte); Going To An Individual Target Point - Raymarine RL70C Owner's Handbook Manual

104

Advancing to a Waypoint

➤ Once you are following a route, you can advance to the next waypoint, even if
you have not reached the current target waypoint:
1. If necessary, press the GOTO default soft key to display the Goto/Follow
soft keys.
2. Press the WAYPOINT ADVANCE soft key. The current leg of the route is
abandoned and the the next waypoint becomes the target. The display is
updated to show the new route leg.

Restart Cross Track Error (XTE)

Whilst you are following a route, or going to a target point, you can restart the
XTE. This sets the XTE to zero and moves the origin to the actual vessel
position.
Restarting XTE is useful if you find yourself off track and want to go straight to
your target, rather than get back onto the original track.
➤ To restart XTE:
1. Press the GOTO default soft key, the Follow/Goto soft keys are displayed.
2. Press the RESTART XTE soft key. The route origin moves to the current vessel
position, thus the XTE becomes zero.

Going To an Individual Target Point

Rather than following a route, you can go directly to a selected target point, this
can be an existing waypoint (not in the current route), or the cursor position.
➤ To navigate directly to an existing waypoint:
1. Use the trackpad to position the cursor over the required waypoint until the
letters WPT and the waypoint soft keys are displayed.
Alternatively, you can select the waypoint from the waypoint list as described in
Section 5.3.
2. Press the GOTO WAYPOINT soft key.
Navigation to the selected waypoint begins. The soft key STOP GOTO is
displayed.
HSB Series LCD Display
D4172-1
D4163-1