130
Language
Select the language in which you wish information to be displayed. The
selected language will be used for screen text, labels, menus and options, but
will not affect the letters displayed by the context-sensitive cursor. The
language setting also affects the display format for lat/long position
information.
Simulator
The simulator allows you to operate your radar display without data from the
antenna and/or external data sources. The options have the following functions:
• Data provides simulated numerical data, and a waypoint display.
• Radar provides a simulated radar picture, with example targets. The picture
does not change if you change the range, although the range rings are
adjusted (see Chapter 3).
• Both provides simulated data and radar picture.
Note: On a radar master display, you cannot view a simulated image whilst the
scanner is in transmit mode.
If you switch the simulator on during transmit mode, the scanner is set to
standby, and you cannot select transmit mode whilst the simulator is on.
However, you can view a simulated image on a repeater display whilst the
master display is in transmit mode.
When the simulator is switched on, a SIMULATOR data box is displayed during
operation, showing the simulation selected.
HSB Series LCD Display