Switching Control Between Radar & Chart Screens; Returning To The Full-Screen Display - Raymarine RL70C Owner's Handbook Manual

Chapter 2: Getting Started
2. To select a different window, press either SELECT WINDOWS soft key until
the required window is highlighted. If necessary, this will toggle windows
on, then press ENTER.
3. To toggle windows off, press the WINDOWS OFF ON soft key.
If any data boxes were displayed at the bottom of the full-screen image, they are
moved to the upper window when you turn windows on.
The illustration on the following page shows the half-screen windows (in radar
mode), and indicates the soft keys you need to use.
Switching Control Between Radar & Chart Screens
In a combined or integrated system, to switch control between radar and chart,
you can change the full-screen mode. Alternatively, when you have both radar
and chart displayed in half-screen windows the soft key RDR CHRT lets you
toggle operating control between the radar and the chart window.
If a window is active , i.e. control of the cursor via the trackpad is available in
that window, and you switch windows off, control automatically returns to the
full-screen mode.
Radar:
Chart:
➤ To change the active window, press the RDR/CHRT soft key to toggle control
between the radar and chart display.The current active display is highlighted in
grey on the RDR/CHRT label and the cursor appears in that window.

Returning to the Full-Screen Display

To return to the full-screen display you can turn windows off, as previously
described. Alternatively, to return to full-screen display without data boxes or
windows:
➤ Press and hold the DISPLAY key for 2 seconds to return to the currently selected
full-screen (upper window) display.
29
D4152-2
D4168-1