You will need the following equipment
to complete the cooker installation
satisfactorily
STABILITY BRACKET
If the cooker is to be supplied
with gas through a fl exible hose,
a stability bracket or chain must
be fi tted.
These are not supplied by with the cooker but
are available at most builders' merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fi tting the cooker
on a stone or concrete fl oor)
3. Rawlplugs (only required if fi tting the cooker on a
stone or concrete fl oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fi tting stability bracket
Check the ap pli ance is electrically safe and gas sound when you have fi nished.
INSTALLATION
Checking the parts
3 pan supports
Wok Ring
Handygrill rack
Allen key
plinth
Positioning the Cooker
The diagrams below show the minimum recommended
distance from the cooker to nearby surfaces.
The cooker should not be placed on a base.
The hotplate surround should be level with, or above,
any adjacent work surface. Above hotplate level a gap
23
Griddle
3 fl at oven shelves and 1 drop
shelf
Handygrill pan / Meat tin
Levelling tool