Table of Contents
Advertisement
Type and usage of options
Type of options
Changing the seam
width of buttonhole
1
Change of needle
position
2
Twin needle sewing
3
Foot switch function
4
Adjusting the darning This function is used for adjusting the pattern shape.
5
Adjustable starting
6
stitch speed
Adjustable reverse
7
stitch speed
Guide
8
Adjusting the touch
panel sensitivity
9
Contrast of Liquid
!0
Crystal Display (LCD)
Button reception
buzzer volume setting
!1
Language setting
!2
Elongation
!3
Deleting the settings
!4
72
The seam width of buttonhole is changeable.
You can change the stitch base line.
Select this option when using twin needle.
You can select the operation to be carried out when
depressing the front section of the foot controller.
You can select the operation from among "reverse
stitch", "lock stitch", "half stitch sewing", "one stitch
sewing", "thread trimming" and "no function".
Adjustable range: -30 - 30
You can select the sewing speed to be employed at
the start of sewing.
You can select the reverse stitch speed and lock
stitch speed.
The guide for winding bobbin thread, setting of
bobbin, threading of needle thread, changing presser
foot and needle can be seen on the LCD display.
You can adjust the touch panel sensitivity in five
steps.
The LCD contrast can be chosen from 11 levels.
You can change the volume of buzzer that is
produced when pressing the button on the touch
panel.
You can select language from 8 languages or
pictographs.
The length of the patterns (Decorative: No.63~75)
can be adjusted. Adjusting range is from size 1 to
size 5.
You can reset all settings to their default settings.
If the pow-
If a pattern
er is turned
Default
is selected
OFF and
setting
again
re-turned
ON
Standard The current
The setting
setting will
will return
remain.
to the de-
fault.
(Depend-
The setting
The setting
ing on the
will return
will return
pattern)
to the de-
to the de-
fault.
fault.
Single
The current
The current
needle
setting will
setting will
remain.
remain.
Reverse
The current
The current
stitch
setting will
setting will
remain.
remain.
0
The current
The current
setting will
setting will
remain.
remain.
Slow
The current
The current
setting will
setting will
remain.
remain.
Slow
The current
The current
setting will
setting will
remain.
remain.
-
-
-
3.0
The current
The current
setting will
setting will
remain.
remain.
6
The current
The current
setting will
setting will
remain.
remain.
Loud
The current
The current
setting will
setting will
remain.
remain.
(Depend-
The current
The current
ing on
setting will
setting will
destina-
remain.
remain.
tion)
(Depend-
The current
The setting
ing on the
setting will
will return
pattern)
remain.
to the de-
fault.
-
-
-
Advertisement
Table of Contents
