Bobbin thread preparation
Taking out the bobbin
Hook cover
Setting thread spool
Small spool
Spool Cap
Spool Cap
Large spool
18
Attention
1
Open the hook cover.
2
Take out the bobbin.
* If the bobbin has too little thread, do not use it as the
thread will get tangled.
* Use only the designated bobbin. Other bobbins may
cause malfunction.
<Exclusive bobbin>
Made of transparent plastic
20.5 mm
1
Place a thread spool to spool pin and a
spool cap onto the spool pin.
* Be aware that a spool with a small remaining
amount of thread can cause tangling or slip-off of
thread.
There are three types of the spool caps, large, medi-
um and small. Choose the size of spool cap according
to the thread spool to be used.
When the bobbin is taken
out and/or put into the bob-
bin case, turn off the power
(turn to "O").
11.5 mm