Table of Contents
Advertisement
Patchwork piecing
60
Pattern No.
Direct 2, 3
Standard presser
Presser foot
foot (A)
To sew pieces of cloth together is called piecing in patch-
work.
When piecing, the seam allowance is usually 1/4" (6.4 mm).
1
1/4" (6.4 mm)
2
* You can change the needle position as you like.
Needle position change: Refer to pages 37 and 74.
Cut the fabric with seam allowance.
Align the right end of the presser foot and
the edge of the fabric and sew.
The needle will enter 1/4" (6.4 mm) from the edge of
the fabric, so the seam allowance of 1/4" (6.4 mm) can
be sewn.
0.0
7.0
1/4" (6.4 mm)
5.6
Attention
Turn OFF the power switch
before replacing the presser
foot.
The needle position can be
adjusted between 0.0~7.0.
When the needle position is
at '5.6', the needle is 1/4" (6.4
mm) from the right edge of
standard presser foot (A).
Advertisement
Table of Contents
