Automatic Lock Stitch And Thread Trimming - JUKI HZL-DX3 Instruction Manual

Automatic lock stitch and thread trimming

★
The sewing machine automatically sews reverse stitches and lock
stitches at the start of sewing. Then, it starts normal sewing.
When you push the reverse stitch button at the end of sewing, the sew-
ing machine sews reverse stitches, trims threads and stops.
Press to change the settings.
Press once
Press twice
Press three times
Example) In the case of straight stitches
36
Straight stitch/zigzag stitch
Screen display:
(Reverse stitch)
Screen display:
(Lock stitch)
Screen display: None
(No setting)
Pattern
Screen display:
(Lock stitch)
Screen display: None
(No setting)
1
After selecting a pattern, you can press
.
is displayed on the screen.
When you press the button again,
show that the lock stitch is set.
2
Place the fabric in the sewing start
position and begin sewing. A
： The machine sews a few back stitches and con-
tinue.
： The sewing machine sews a few lock stitches
and continues sewing.
3
The sewing machine operates differently
according to the button you press. B
: Press the reverse stitch button.
The machine sews reverse stitches, stop sew-
ing and trim both needle and bobbin threads
automatically.
: Press the lock stitch button.
The sewing machine sews lock stitches, auto-
matically stops and trims both the needle and
bobbin threads.
Example: straight stitch
A
Fabric Fabric
B
is displayed to
A
B