One-Point Stitch/Sewing Letters; Preparation Before Sewing; Test Sewing - JUKI HZL-DX3 Instruction Manual

One-point stitch/sewing letters

Preparation before sewing

Fabric

Test sewing

Correct shape
Quilting: 01~35
Pattern
Decorative: 01~73
No.
Letters
Manual buttonhole presser
Presser
foot
foot (I)
Pattern
-
No.
Presser Manual buttonhole
foot presser foot (I)
When right side is higher than
left side,
Adjustable range
~
Carry out the adjust-
ment while conducting
test sewing by pressing
(In order to sew a pattern neatly, apply
interlining and conduct a test sewing first.)
Use an iron to attach a fusible interlining to the wrong side of
fabric.
* When stitch length becomes too small, the bobbin thread
will come out to the front side of fabric and/or stitches
might get stuck. Therefore make sure to conduct a test
sewing beforehand.
Since the pattern might be deformed ac-
cording to the type and thickness of fabric
and fusible interlining to be used, make
sure to conduct test sewing on the same
fabric and interlining.
Carry out adjustment using the
optional functions.
(Refer to page 78 for details.)
When right side is lower than
left side,
Attention
Turn OFF the power
switch before replacing
the presser foot.
* In the case a quilting pattern
is sewn as the one-point
stitch, some pattern shapes
can be different from those
displayed on the screen.
Adjustable range
~
Carry out the adjust-
ment while conducting
test sewing by pressing
63