Table of Contents
Advertisement
Bartacking
Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will automatically make a
u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use filler fabric or cardboard.
Example of use
Fabric
54
Pattern No.
Presser foot
Trousers
and skirt
10 cm
Practical 17
Manual buttonhole
presser foot (I)
Bag
1
Pass the needle thread through the
presser foot.
2
Place the fabric under the presser foot.
Attention
Turn OFF the power switch
before replacing the presser
foot.
Pocket
Advertisement
Table of Contents
