Overcasting Stitch - JUKI HZL-DX3 Instruction Manual

Overcasting stitch

・ This stitch is used to prevent the edge of fabric from fraying.
Overcasting stitch 1
Overcasting stitch 2
40
Pattern No. Direct 7
Overcasting presser
Presser foot
foot (C)
Pattern No. Practical 07
Overcasting presser
Presser foot
foot (C)
Turn OFF the power switch
before replacing the presser
foot.
Push the fabric towards the guide and sew.
If the fabric and guide are apart, it will not make a
nice stitch formation. Make sure to guide the fabric
along the guide and sew slowly.
* Before sewing, make sure to check that the needle
will not hit the presser foot.
Turn OFF the power switch
before replacing the presser
foot.
This stitch is used for overcasting medium- to heavy-
weight materials.
Guide the fabric along the guide and sew.
* Before sewing, make sure to check that the needle
will not hit the presser foot.
Attention
Attention