Table of Contents
Advertisement
Machine Maintenance
When lint and/or dirt has built up, it may cause machine
failures. Therefore, clean the machine frequently.
Straight stitch
slide plate
Throat plate
Bobbin case
holder
Always must be disconnected plug from sock-
et-outlet before remove throat-plate and re-
move bobbin-case-holder.
1
Move the straight stitch slide plate toward
you (normal needle hole).
Lever
Move the lever to the right to use the normal needle hole.
2
Remove the throat plate.
Remove needle and presser foot and remove the needle
plate by using T-shape screwdriver.
3
Remove the bobbin case holder.
4
Remove lint and dirt.
Remove lint and dirt around the feed dog and bobbin
case holder with the cleaning brush.
5
Install the bobbin case holder.
Install the bobbin case holder so that points A and B
touch each other.
Install the throat plate.
When attaching the throat
plate, align the positioning
B
pins with holes of throat
plate.
A
Attention
95
Advertisement
Table of Contents
