Twin Needle Sewing - JUKI HZL-DX3 Instruction Manual

3 Twin needle sewing

By using two needles beautiful decorative stitches can
be sewn.
* When using twin needles, make sure to set twin nee-
dle sewing in Option
* When twin needle sewing, make sure to use thread
size smaller than No. 60.
* Make sure to use a twin needle with size of 2.0 mm
(included needle: 2.0 mm).
* When twin needle sewing, the sewing speed will be-
come slower.
2
C
E
F
and perform test sewing.
B
A
D
3
G
4
Needle bar
thread guide
Turn OFF the power before
Attention
replacing needles.
Direct: 1, 4, 5, 9
Pattern
Practical: 01~06
No.
Quilting: 01
Decorative: 63~69
Presser Standard presser foot (A)
foot Manual buttonhole presser foot (I)
2.0 mm
* Bobbin winding is also
possible with supplementary
spool pin.
How to thread the needles
1
Place the supplementary spool pin.
2
Thread to the thread guide A first. After that,
thread paths are same up from B to F .
3
Do not thread G for right-hand needle.
4
Thread to right-hand and left-hand needles
separately.
* Automatic needle threader can not be used.
Thread each needle manually.
* Automatic thread trimmer can not be used in
case of twin needle sewing.
1
75