One-Point Stitch/Sewing Letters; Preparation Before Stitching; Test Sewing - JUKI HZL-F series Instruction Manual

One-point stitch/sewing letters

F600
F400
F300
Preparation before sewing
(in order to sew a pattern neatly, apply interlining
and conduct a test sewing first.)
Fabric

Test sewing

71
72
Pattern
No.
Presser
foot
Pattern Practical 22
No. Practical 20
Manual buttonhole
Presser
foot
presser foot (I)
Pattern adjustment dial
Correct shape
When right side is higher than
left side,
One point 01~38
F600
One point 01~33
F400
One point 01~18
F300
Letters
Manual buttonhole
presser foot (I)
Use an iron to attach a fusible interlining to the wrong side of
fabric.
* When stitch length becomes too small, the bobbin thread will
come out to the front side of fabric and/or stitches might get
stuck. Therefore make sure to conduct a test sewing beforehand.
Since the pattern might be deformed
according to the type and thickness of
fabric and fusible interlining to be used,
make sure to conduct test sewing on the
F600
same fabric and interlining.
F400 / F300
Select stitch pattern No. 22
20
stitch pattern deforms, adjust it by the
pattern adjustment dial.
Turn the pattern
adjustment dial to
the left side.
Attention
Turn OFF the power switch
before replacing the presser
foot.
) for test sewing; If the
F400 / F300
When right side is lower than
left side,
Turn the pattern
adjustment dial to
the right side.
(No.
F600