Overcasting Stitch - JUKI HZL-NX7 Instruction Manual

7.4. Overcasting stitch

No. Pattern
007
022
Lightweight
023
material
Presser foot
Overcasting presser foot (C)
Leave the machine in Lock mode
This stitch is used to prevent the edge of fabric from fraying.
Push the fabric towards the guide and sew.
If the fabric and guide are apart, it will not make a nice stitch
formation. Make sure to guide the fabric along the guide and
sew slowly.
* Before sewing, make sure to check that the needle will not
hit the presser foot.
89