Setting The Automatic Back Tacking, Thread Trimming And Presser Foot Lifting - JUKI DX-4000QVP Instruction Manual

4.15. Setting the automatic back tacking, thread trimming and
presser foot lifting
The back tacking at the beginning and end of sewing and the back tacking and thread trimming / presser foot lift after
thread trimming at the end of sewing can be set.
Select a pattern. Set operations of the sewing machine
by pressing the relevant button on the screen.
Setting for the back tacking at the beginning of sewing
Select one from the three types of back tacking.
: OFF : Reverse stitch
Setting for the back tacking at the end of sewing
Select one from the three types of back tacking.
: OFF : Reverse stitch
Presser foot lift after thread trimming
: OFF The presser foot is not lifted after thread trimming
: ON The presser foot is lifted after thread trimming
Back tacking and thread trimming
: OFF Thread trimming is not carried out
: ON Thread trimming is carried out
● In the case of setting the automatic back tacking
Sewing start
Place the material at the sewing start position and begin sewing.
In the case the back tacking at the beginning of sewing is se-
lected, the reverse stitch button and back tacking button will not
operate.
Sewing end
Press the button which corresponds to the type of back tacking
you have selected.
( / )
Even if you press the button that does not correspond to the
type of back tacking you have selected, the back tacking you
have selected will be carried out.
: Lock stitch
: Lock stitch
44