46
en | Installing the Roof Parapet and Pipe Mounts
3.8
Attach Pendant to Pipe and Tighten
1.
2.
F.01U.215.779 | 1.0 | 2011.07
Before attaching the Pendant, visually inspect the Pendant dome and the Interface Board
connectors for any blocked pin holes and bent pins.
Tilt the Pendant enough to place its mounting hook on top of the its housing, over the
recessed hinge pin of the Dome Cap.
Figure 3.13 Pendant to Roof / Pipe Mount Attachment
1
Tilt Dome
2
Hook and drop
2a Dome Cap
2b Recessed Hinge Pin
2c
Dome Connector
3
Rotate down to engage dome connector
4
Tighten the two (2) mounting screws to a minimum torque of 10-12 N-m
(90-105 in.-lbs)
Installation Manual
AutoDome 700 Series IP PTZ Camera
a
b
c
Bosch Security Systems, Inc.