Attach Pendant Arm To Junction Box - Bosch VEI-Series User Manual

Dinion Infrared Imager
4.4

Attach Pendant Arm to Junction Box

The bottom hinge pin of the camera arm has a stop to hold the
hinge open while attaching the arm to the junction box.
1.
Figure 4.3 Camera Box Hinge Alignment
2.
NOTICE!
Both hinge pins must be fully compressed to open (unlock) the
hinges of the camera arm and before proceeding to step 3.
3.
4.
DANGER!
Serious injury or death can occur if the hinge pins of the camera
arm are not fully engaged (locked) to the junction box. Use
caution before releasing the camera arm.
Bosch Security Systems, Inc.
Compress the bottom hinge pin by pushing the pin lever
downward and rotating it behind the hinge pin stop.
Open the top hinge by pushing and holding up the pin
lever.
While continuing to hold the top hinge pin, open and align
the top and bottom hinges of the camera arm to their
mating points on the junction box. See Figure 4.3, above.
Once you have aligned the hinges, release the top hinge
pin to engage its mating hinge on the junction box, and
then release the bottom hinge pin from the hinge pin stop
to lock the camera arm to the junction box.
User Manual
Installation | en
F.01U.263.417 | 3.0 | 2012.01
23