Bosch AutoDome 700 Series Installation Manual page 50

50 en | Installing the In-Ceiling Mount
3.
4.
F.01U.215.779 | 1.0 | 2011.07
Place the Bracket Assembly over the ceiling tile, which is used to mount the In-Ceiling
AutoDome. Then snap the Bar Clips of the bracket to the ceiling rails.
A
Figure 4.2 Suspension Ceiling Bracket (Top View)
1 Suspension Bars
2 Base Plate
Use the bracket Base Plate as a template or cut a 7.9 in. hole with a tolerance of ±1/8 in.
(200 mm ± 2.2 mm) hole in the center of the ceiling tile with a drywall utility saw or Jig
Saw.
Figure 4.3 Cut Hole in Ceiling Tile
Installation Manual
3 Securing Screw (4)
4 Bar Clips
AutoDome 700 Series IP PTZ Camera
Bosch Security Systems, Inc.