Table of Contents
Advertisement
AutoDome 700 Series IP PTZ Camera
Audio Connections
1.
2.
3.
NOTICE!
Refer to the VG5 700 Series AutoDome User Manual for configuring and using audio over an IP
Ethernet network.
Bosch Security Systems, Inc.
Remove the 100 Ω termination resistor from the Biphase terminals.
Connect the audio line level source to the Biphase C+ input terminal.
Connect the audio signal ground to the Biphase C- input terminal.
The following figure illustrates the connections for audio over an IP network.
Figure 5.1 Connections for audio over an Ethernet network
1
C- (Biphase)
2
C+ (Biphase)
3
Earth Ground
4
RxD
5
TxD
6
Signal Ground
Installation Manual
7
AutoDome Data In/Out
8
P105/P106 Connector
9
Audio Out
Cable and Wire Standards | en
F.01U.215.779 | 1.0 | 2011.07
59
Advertisement
Table of Contents
