Installation; Operating Conditions; Space Requirements For Machine Operation And Maintenance; Tool Kit Supplied With The Machine - 3M -Matic 7000r-I Instructions And Parts List

7. Installation

7.1 Operating Conditions

The machine should operate in a
dry and relatively clean environment
(See Specifications).
7.2 Space Requirements for
Machine Operation and
Maintenance Work
Minimum distance from wall
(Figure 7-1):
A = 1000mm.
B = 700mm.
Minimum height = 2700mm.
7.3 Tool Kit Supplied with Machine
A tool kit containing some tools are
supplied with the machine. These
tools should be adequate to set-up
the machine, however, other tools
supplied by the customer will be
required for machine maintenance.
7.4 Machine Set-Up / Bed Height
1 - Lift the machine with belts or
To set the machine bed height,
do the following:
2 - Adjust machine bed height.
Also refer to "Specifications"
3 - Lock the screws.
4 - Repeat the operation for all legs
5 - For Outer Column Repositioning-
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 21
44-0009-2165-8 / ECO# 0078045
ropes paying attention to
place the belts in the points
(Figure 7-2).
The case sealer is equipped
with four (4) adjustable legs
that are located at the corners
of the machine frame.
The legs can be adjusted to
obtain different machine bed
heights (Figure 7-3).
(It is not necessary to fix or
anchor the machine to the floor).
See Special Set-up Procedure
(Section 11).
Source Document for all related Manuals/Translations
Figure 7-2
Original Instructions
B
A
Figure 7-1
Figure 7-3
International - ENG
February 2021