Plastic Ties Removal; Assembly Completion / Machine Set-Up - 3M -Matic 7000r-I Instructions And Parts List

7. Installation
7.5 Removal of Plastic Ties
Cut the plastic which attaches the
top head to the frame and remove
the polystyrene blocks (Figure 7-4).
Cut the plastic strap which attaches
the strip and the EMERGENCY STOP
cable to the frame (Figure 7-5).
Cut the plastic ties holding the
lower taping head in position
(Figure 7-6).
7.6

Assembly Completion / Machine Set-up

Note – A tool kit consisting of metric
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 22
44-0009-2165-8 / ECO# 0078045
(continued)
open end and hex socket
wrenches is provided with
the machine. These tools
should be adequate to
set-up the machine, however,
other tools supplied by the
customer will be required
for machine maintenance
(see Technical Documentation/
Spare Parts-Order Section).
Source Document for all related Manuals/Translations
Original Instructions
Figure 7-4
Figure 7-5
Figure 7-6
International - ENG
February 2021