Installation; Operating Conditions; Space Requirements For Machine Operation And Maintenance; Tool Kit Supplied With The Machine - 3M -Matic 7000a Pro Instructions And Parts List

7. Installation

7.1 Operating Conditions

The machine should operate in a
dry and relatively clean environment
(See Speci cations).
7.2 Space Requirements for
Machine Operation and
Maintenance Work
Minimum distance from wall
(Figure 7-1):
A = 1000mm.
B = 700mm.
Minimum height = 2700mm.
7.3 Tool Kit Supplied with Machine
A tool kit containing some tools are
supplied with the machine. These
tools should be adequate to set-up
the machine, however, other tools
supplied by the customer will be
required for machine maintenance.
7.4 Machine Set-Up / Bed Height
1 - Lift the machine with belts or
To set the machine bed height,
do the following:
2 - Adjust machine bed height.
Also refer to "Speci cations"
3 - Lock the screws.
4 - Repeat the operation for all legs.
5 - For Outer Column Repositioning-
3M-Matic ™ 7000a-7000a3 Pro
Page 19
ropes paying attention to place
the belts in the points
(Figure 7-2).
The case sealer is equipped
with four (4) adjustable legs
that are located at the corners
of the machine frame.
The legs can be adjusted to
obtain di erent machine bed
heights (Figure 7-3).
(It is not necessary to x or
anchor the machine to the oor).
See Special Set-up Procedure
(Section 11).
B
A
Figure 7-2
Figure 7-1
Figure 7-3
NA - ENG
March 2017