Table Of Warnings - 3M -Matic 7000r-I Instructions And Parts List

3. Safety
(continued)
3.3

Table of Warnings

Warning
• To reduce the risk associated with
mechanical and electrical hazards:
- Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
- Allow only properly trained and
qualified personnel to operate and
service this equipment.
Warning
• To reduce the risk associated with
hazardous voltage:
- Position electrical cord away from foot
and vehicle traffic.
Warning
• To reduce the risk associated with
pinches, entanglement and hazardous
voltage:
- Turn peumatic and electrical supplies off
and disconnect before performing any
adjustments, maintenance or servicing
the machine or taping heads.
Warning
• To reduce the risk associated with
pinches and entanglement hazards:
- Do not leave the machine running
while unattended.
- Turn the machine off when not in use.
- Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 6
44-0009-2165-8 / ECO# 0078045
Figure 3-2
Figure 3-3
Figure 3-3
Figure 3-4
Important!
Original Instructions
Source Document for all related Manuals/Translations
Cavity in the conveyor bed.
Never put your hands inside any part
of the machine while it is working.
Serious injury may occur (Figure 3-4).
International - ENG
February 2021