Mgbic-08 Specifications (1000Base-Elx; Mgbic-02 Specifications (1000Base-T; Mgbic-Lc09 Operating Range; Mgbic-08 Optical Specifications - Enterasys SecureStack C2 C2G170-24 Hardware Installation Manual

Table A-8 MGBIC-LC09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF

MGBIC-08 Specifications (1000BASE-ELX)

Table A-9 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 70 km) depends on the quality of the installed single-mode fiber-
optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the
attached segment. The Link Power Budget must not exceed those specified in this table. The
MGBIC-08 input power must not exceed -3 dBm. Otherwise, saturation could occur.
Table A-10 MGBIC-08 Operating Range
Item
9 or 10 µm SMF

MGBIC-02 Specifications (1000BASE-T)

Table A-11 MGBIC-02 / Specifications
Item
Supported Cable
Type:
Maximum Length
Connector
Modal Bandwidth @
1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dB
1550 nm
N/A
Specification
Copper, Category 5 UTP
Up to 100 meters
RJ45
Gigabit Ethernet Specifications
Range
2-550 Meters
2-550 Meters
2-550 Meters
2-10,000 Meters
+2 dBm, typical +5 dBm, max.
-26 dBm, typical
28 dB, typical
Range
70,000 Meters
SecureStack C2 Installation Guide A-5