This appendix lists the specifications and regulatory requirements for the GPIMs and the media
they use. Enterasys Networks reserves the right to change these specifications at any time without
notice. The available GPIM options are the GPIM-01, GPIM-08, and GPIM-09. All three devices
use SC connectors. The GPIM-01 supports multimode (MMF) fiber cable, the GPIM-08 supports
single mode (SMF) fiber cable, and the GPIM-09 supports both multimode and single mode fiber
cable, as specified in the following tables.
C.1
GIGABIT ETHERNET SPECIFICATIONS
The following specifications for the Gigabit Ethernet GPIMs meet or exceed the IEEE 802.3z
specification.
C.1.1
GPIM-01 Specifications (1000BASE-SX)
Table C-1 GPIM-01 Optical Specifications
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
GPIM Specifications
62.5 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
50 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
GPIM Specifications
C
C-1