Loewe Connect 32 User Manual page 93

Connect 32
User manual
System settings
Control
DR +
You can adapt the digital recorder to suit your needs when you record
programmes on an externally attached USB hard disk.
Call settings for the digital recorder
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark more ...,
call other settings.
Mark DR+,
go to next column.
... DR+ Recording Recording
Notify hid-
den sections
Jump dis-
tance
Smart Jump
Recording
subtitles
DR+
Streaming
Mark desired setting,
go to next column.
Make settings,
OK confirm setting.
Explanation of the DR+ setting options
Recording You can set a pre-record and post-record time for
timer recordings made without auto time control.
This minimizes the risk that a part of the broadcast
is not recorded due to the broadcast starting earlier
and/or finishing later.
Factory setting: pre-record time: 1 min,
Notify If an entry has been hidden in an archive recording,
hidden you can get informed by a screen message when
sections skipping a hidden area.
Factory setting: yes.
Jump Set the standard jump distance (in minutes) used
distance for jumping forwards or backwards in the movie by
briefly pressing the
Factory setting: 2 min.
Smart jump If the „Smart jump" mode is activated you can
approach a desired place by pressing the
buttons alternately and halving the jump width. After
every 3rd jump in the same direction the jump width
is doubled (up to a maximum of 8 minutes).
If off is set you always jump the same currently set
jump width (time) with the
Factory setting: on
(1 for devices in DK, FIN, N or S: yes.
You may set the pre-record and post-record times here.
post-record time: 5 min.
or keys.
and
and buttons.
Serial The serial recording tolerance is necessary to
recording avoid recording a serial more than once when it is
tolerance broadcast more than once a day.
It is only recorded when it begins within the
given time interval (start time +- series recording
tolerance).
Use the numeric button on the remote control to
enter the time (always two-digit for 01 to 60 min.).
±
Factory setting: 30 min.
Recording Select here whether subtitles are to be recorded for
subtitles DVB stations.
Factory setting: no
DR+ Here, all settings are made in order to use the DR+
Streaming archives of other LOEWE TV sets in the home
network.
See next page for further information.
(1 .
93