Loewe Connect 32 User Manual page 22

Connect 32
User manual
Initial installation
Setting options for DVB-S reception:
If you have not selected Satellite (DVB-S/cable x) in step Connect
antenna cable(s) in the initial installation, proceed to the next section
Setting options for all types of reception.
Network
selection
Network selection (DVB-S)
Please state from which network you wish to receive your station.
Note: The newly selected parameter must be confirmed with the
ASTRA LCN
Standard
Back with
Select network.
If several networks are available via DVB-S, you can
decide which network you want to receive your
channels from.
Proceed to next step.
Select
satellite
Select satellite installation
installation
Please define which satellites you receive or which satellite equipment you use.
Single satellite
2 satellites on 22 kHz switchbox
2 satellites on toneburst switch
Max. 4 satellites on DiSEqC multiswitch
DiSEqC one cable communal system
Other communal installation
Indietro con
Selecting the satellite system.
Specify how you receive which satellite(s) (single
satellite or type of satellite system). Ask your
dealer in this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be
changed in most cases.
Single Reception of a single satellite via a connected LNC
satellite (LNB).
2 satellites Reception of two different satellites with two LNCs
on 22 kHz (LNBs) which are connected to the TV set by a 22
switchbox kHz switchbox.
2 satellites Reception of two different satellites with two LNCs
on toneburst (LNBs) which are connected to the TV set by a
switch toneburst switch.
Max. 4 The TV set controls a DiSEqC multiswitch to which
satellites up to four LNCs (LNBs) for different satellites are
on DiSEqC connected.
multiswitch
DiSEqC Select setting if the TV set is connected to a DiSEqC
one cable single-cable system (according to EN 50494). Several
communal Sat receivers can be connected to one Sat cable.
system
22
button.
OK
Proceed with
Avanti con
other Select setting if the TV set is connected to a
communal single-cable system (without DiSEqC). Several
installation Sat receivers can be connected to one Sat cable.
Contrary to a DiSEqC one cable communal system
there are restrictions in the range of certain reception
frequencies in "common" single-cable community
systems.
Proceed to next step.
The rest of the initial installation wizard routine
depends on the selected satellite system in step Select
satellite installation.
The different satellite systems are described in the
following sections of initial installation.