Loewe Connect 32 User Manual page 19

Connect 32
User manual
Initial installation
Connect
antennas
Connect antenna cable(s)
cable(s)
Your television will automatically search for stations. With
cables are available for your TV set and connect them to the correct antenna sockets,
which are specified here in the right-hand column.
Antenna cable(s) for:
Cable analog
Terrestrial (DVB-T)
Cable (DVB-C)
Satellite (DVB-S / cable 1)
Satellite (DVB-S / cable 2)
Back with
Select antenna cable.
OK Connect/disconnect antenna cable.
Select the antenna cables that are connected to
your TV.
Ahead of each selected antenna, the symbol
appears.
Cable analog:
Terrestrial (DVB-T):
Cable (DVB-C):
Satellite (DVB-S/cable 1):
Satellite (DVB-S/cable 2): digital stations via
Proceed to next step.
The rest of the initial installation wizard routine
depends on the selected antennas (Cable analogue,
DVB-T, DVB-C, DVB-S) in step Connect antennas
cable(s).
The different antennas/types of reception are
described in the following sections of initial installation.
, highlight which antenna
OK
to antenna socket(s):
ANT TV
ANT TV
ANT TV
ANT SAT
ANT SAT2
Proceed with
analogue stations via
cable
digital stations via
antenna
digital stations via
cable
digital stations via
satellite
satellite
Setting options for reception via Cable analog:
If you have not selected Cable analog in step Connect antenna
cable(s) in the initial installation, proceed to the next section Setting
options for DVB-T reception.
TV/col.
standard
TV/col. standard
Please select the TV/colour standard.
Automatic BG+L
PAL-BG
PAL-DK
PAL-I
Back with
The selection of a Colour standard is only required
when the Location of TV set Other country was
selected. Otherwise, the country-specific default
settings will be preset when selecting the Location
of TV set. This step will be skipped then
Select appropriate colour standard.
Proceed to next step.
SECAM-BG
SECAM-DK
SECAM-L
NTSC
Proceed with
19