Loewe Connect 32 User Manual page 104

Connect 32
User manual
System settings
Connections
Adjusting the HiFi/AV amplifier
Sound playback via ... - HiFi/AV amplifier
The sound components wizard permits configuration of different
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or
digital) with different digital audio formats (Dolby Digital, dts, MPEG,
and stereo/PCM). See the user guide of the audio amplifier for more
information.
For information on navigation within the wizard see
chapter General information on menu operation.
HOME: Call Home view.
Mark System settings,
OK call System settings.
Select Connections,
go to next column.
Select Sound components,
Call sound components wizard.
Sound
SOUND COMPONENTS WIZARD - Sound playback via ...
Please specify here via which sound components you want to listen to your
... ... Sound com-
reproduction
TV sound. If you do not want to listen exclusively via the built-in speakers,
ponents
all additional speakers or devices must be connected with the audio
via ...
output sockets AUDIO DIGITAL OUT.
If you have a TV set without built-in speakers, the items relating to the TV
speakers may not be selected.
Note: The newly selected parameter must be confirmed with the
button.
TV speakers
Speaker system (AUDIO OUT)
HiFi/AV amplifier
HiFi/AV amplifier or TV speakers (switchable)
Proceed with
Mark HiFi/AV amplifier or HiFi/AV amplifier or
TV speakers (switchable),
OK Confirm selection.
HiFi/AV Select setting when an amplifier is connected and
amplifier the TV speakers are not used.
HiFi/AV Select setting when an amplifier is connected and
amplifier or the TV speakers are used. In the sound mode
TV speakers selection the audio reproduction can then be
(switchable) switched between the amplifier and the TV speakers.
Proceed to next step.
Type of sound
Type of sound transmission
transmission Please select whether the TV sound signal should be transmitted to the
... Sound com-
HiFi/AV amplifier by a digital (via the SPDIF OUT) or analog (via the AUDIO
ponents
OUT) signal.
digital
Back with
Select whether the sound is to be transmitted
digitally or analogue to the the amplifier (see right
hand column):
digital: Proceed to Sound formats.
analogue: proceed to Type of amplifier.
104
OK
End with
analogue
Proceed with
Sound
Sound formats
formats
Please specify, what kind of sound formats can be processed by your
... Sound com-
HiFi/AV amplifier and mark them by the button
ponents
Stereo (PCM) Stereo (PCM)
dts
MPEG
Dolby Digital
Back with
Select sound formats which can be decoded with
the digital amplifier (see operating manual of the
used amplifier).
OK adopt sound formats.
Proceed to next step.
Amplifier
Amplifier Type
Type
Please specify which amplifier type is connected.
... Sound com-
ponents
Surround amplifier
Back with
Please select the amplifier type which is connected
(surround or stereo amplifier).
Back: Finish wizard.
.
OK
Proceed with
Stereo amplifier
Proceed with