Loewe Connect 32 User Manual page 90

Connect 32
User manual
System settings
Control
Automatic update via the internet
At the end of the initial installation, Information on new software
updates was selected.
This item cannot be called up via the menu, but appears
automatically when a new version is found in the search for software.
New software package found
If the TV set has found a new software version during the check, you
will be informed about this via a screen message.
Select the desired procedure.
SOFTWARE UPDATE WIZARD - New software
A new software version is now available and can be downloaded from the internet.
New software: V1.1.12.0
Please specify how you would like to continue:
Load new software now
Load software when switching off to standby
Load software later (max. 3 times notification)
Do not load this software version
Adopt with
OK
Load the After confirmation, the new TV software will be
software loaded from the internet and then programmed.
now
Load the The software will be loaded and programmed after
software the TV set has been switched off into standby mode
when for the next time. The display on the control panel
switch off to will light up blue during the update.
standby The TV set must not be switched off at the mains
before the downloading process is complete (control
panel display lights up white)!
Load the Loading the software will be postponed to a later date.
software The new software message will be displayed the next
later (at time the TV set is switched on.
most If the loading process is postponed three times then
three-fold the message will only be shown again once the next
notification) software version is available.
Do not The new software will not be loaded. The on-screen
load this message will only be shown again for the next soft-
software ware version.
version
Confirm selection.
90
(Current software: V1.1.11.0)