Loewe Connect 32 User Manual page 23

Connect 32
User manual
Initial installation
Setting options for the satellite system (single satellite):
Select
single satellite
Select satellites
Please specify here which satellite you receive.
Note: The newly selected parameter must be confirmed with the
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
ASTRA3 23,5°E
Back with
Select satellite,
OK Confirm selection.
Proceed to next step.
Dual/single
band
Dual/single band (ASTRA1 19,2°E)
Here, please specify whether you are using a Dual Band (Universal) LNB or a Single Band
LNB.
Dual band (low/high)
Back with
Select Dual band (low/high) or Single band.
Here you specify if you use a Dual Band (Universal)
LNB or a Single LNB.
Proceed to next step.
LNC
frequencies
LNB frequencies
ASTRA1 19,2°E low Band
Back with
Set LNB frequencies.
OK Adopt settings.
The setting of the LNB frequency is only called
when you have used the setting Single band
in step Dual / single band.
Normally, you do not need to change the values
for high and low band, unless the LNC (LNB) of
your satellite system uses a different oscillator
frequency (important for the frequency display).
Proceed to next step.
Proceed to section Setting options for DVB-S
reception (continued).
button.
OK
ASTRA1 19,2°E Eutelsat 5 West A 5°W
Nilesat 7°W
Eutelsat 16A 16°E
Hot Bird 13°E Eutelsat 7 West A 7,2°W
Eurobird 9A 9°E Eutelsat 8 West A 8°W
Eurobird 7A 7°E Eutelsat 12 West A 12,5°W
ASTRA4A 4,8°E Telestart12 12,5°W
Thor/Intelsat10-02 0,8 Intelsat901 18°W
Proceed with
Single band
Proceed with
OK
9750 MHz 10000 MHz 10200 MHz 10600 MHz
Proceed with
Setting options for the satellite system (2 satellites on 22
kHz switchbox / 2 satellites on toneburst switch):
Satellite
selection
Select satellites
Please select satellite 1 and satellite 2.
Note: The newly selected parameter must be confirmed with the
Satellit 1 Satellit 2
none
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
Back with
Mark Satellite 1 / Satellite 2,
select satellite.
OK Adopt settings.
Proceed to next step.
LNC
frequency
(22 kHz
LNB frequencies
Switch box)
Please select the LNB frequency for the Low Band.
Note: The newly selected parameter in each case must be confirmed with the
ASTRA1 19,2°E Low Band
Hot Bird 13°E Low Band
Back with
LNC
frequencies
LNB frequencies
(Toneburst
Please specify the oscillator frequency/frequencies of your LNB.
switch)
Note: The newly selected parameter in each case must be confirmed with the
ASTRA1 19,2°E low band
ASTRA1 19,2°E high band
Hot Bird 13°E low band
Hot Bird 13°E high band
Back with
Set LNB frequencies.
OK Adopt settings.
Normally, you do not need to change the values
unless the LNC (LNB) of your satellite system
uses a different oscillator frequency (important
for the frequency display).
Proceed to next step.
Proceed to section Setting options for DVB-S
reception (continued).
button.
OK
ASTRA3 23,5°E Thor/Intelsat10-02 0,8
ASTRA1 19,2°E Eutelsat 5 West A 5°W
Eutelsat 16A 16°E Nilesat 7°W
Hot Bird 13°E Eutelsat 7 West A 7,2°W
Eutelsat 8 West A 8°W
Eurobird 9A 9°E
Eurobird 7A 7°E Eutelsat 12 West A 12,5°W
ASTRA4A 4,8°E Telestart12 12,5°W
Proceed with
button.
OK
9750 MHz 10000 MHz 10200 MHz 10600 MHz
9750 MHz 10000 MHz 10200 MHz 10600 MHz
Proceed with
button.
OK
9750 MHz 10000 MHz 10200 MHz 10600 MHz
10600 MHz 10750 MHz 11000 MHz 11250 MHz
9750 MHz 10000 MHz 10200 MHz 10600 MHz
10600 MHz 10750 MHz 11000 MHz 11250 MHz
Proceed with
23