Table of Contents
Advertisement
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Align and place the speakers on the palm-rest assembly.
2. Route the speaker cable through the routing guide on the palm-rest assembly.
Next steps
1. Install the
assembly inner
2. Install the
3-cell battery
3. Install the
base
cover.
4. Install the
microSD
card.
5. Install the
SIM
card.
6. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
M.2 2280 solid-state drive
6. Remove the
memory
module.
60
Removing and installing components
frame.
or
4-cell
battery.
after working inside your
before working inside your
card.
or
M.2 2230 solid-state
computer.
computer.
drive.
Advertisement
Table of Contents
