Table of Contents
Advertisement
Steps
1. Align and place the sensor board on the display back cover.
2. Connect the display cable to the connector on the sensor board and close the latch.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
base
cover.
5. Install the
microSD
card.
6. Install the
SIM
card.
7. Follow the procedure in
Display back cover
Removing the display back cover
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
display
assembly.
6. Remove the
display
bezel.
7. Remove the
display
panel.
8. Remove the
display
hinges.
9. Remove the
camera/microphone
10. Remove the
eDP
cable.
11. Remove the
sensor
board.
About this task
The following images indicate the location of the display back cover and provide a visual representation of the removal
procedure.
after working inside your
before working inside your
card.
module.
computer.
computer.
Removing and installing components
99
Advertisement
Table of Contents
