Table of Contents
Advertisement
Steps
1. Place the dummy SIM-card slot filler into its compartment on the palm rest.
NOTE:
Ensure that the dummy SIM-card slot filler is aligned with the ribs on the palm-rest assembly.
2. Press the dummy SIM-card slot filler until it clicks into place and ensure it fits securely into the SIM card slot.
Next steps
1. Install the
display
assembly.
2. Install the
keyboard assembly
3. Install the
smart card
4. Install the
system
board.
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
5. Install the
assembly inner
6. Install the
system
fan.
7. Install the
3-cell battery
8. Install the
WWAN
card.
9. Install the
WLAN
card.
10. Install the
base
cover.
11. Install the
microSD
card.
12. Install the
SIM
card.
13. Follow the procedure in
Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
reader.
frame.
or
4-cell
battery.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
103
Advertisement
Table of Contents
