Steps
1. Connect the display cable to the connector on the display panel and close the latch.
2. Adhere the conductive tape to secure the display cable to the display panel.
3. Insert the display panel tabs into the slots on the display cover.
4. Replace the four (M2.5x3.5) screws to secure the display panel to the display back cover.
Next steps
1. Install the
display
bezel.
2. Install the
display
assembly.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Install the
SIM
card.
6. Follow the procedure in
after working inside your
computer.
Removing and installing components
89