Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system board and provides a visual representation of the installation procedure.
1. Fingerprint reader connector
3. Camera/IR cable connector
5. Solid-state drive-SSD-1 slot
7. Battery cable connector
9. LED board connector
11. Solid-state drive-SSD-2 slot
13. Speaker cable connector
64
Removing and installing components
2. WLAN connector
4. eDP/display cable connector
6. Touchpad cable connector
8. Memory modules
10. USH board connector
12. WWAN connector