Table of Contents
Advertisement
Figure 8. M.2 2230 solid-state drive with bracket
Steps
1. Installing M.2 2230 solid-state drive without bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2230 solid-state drive at an angle into its slot on the system board.
c. Replace the (M2x4) screw to secure the M.2 2230 solid-state drive to the system board.
2. Installing M.2 2230 solid-state drive with bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2230 solid-state drive at an angle into its slot on the system board.
c. Replace the (M2x4) screw to secure the solid-state drive to the system board.
d. Align the screw holes on the solid-state drive bracket with the screw holes on the system board.
e. Replace the two (M2x3) screws to secure the solid-state drive bracket to the system board.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
card.
4. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
34
Removing and installing components
after working inside your
before working inside your
card.
computer.
computer.
Advertisement
Table of Contents
