7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
9. Remove the
heat sink (integrated)
10. Remove the
3-cell battery
11. Remove the
system
fan.
12. Remove the
assembly inner
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
1. Fingerprint reader connector
3. Camera/IR cable connector
5. Solid-state drive-SSD-1 slot
7. Battery cable connector
9. LED board connector
11. Solid-state drive-SSD-2 slot
13. Speaker cable connector
or
heat sink
(discrete).
or
4-cell
battery.
frame.
2. WLAN connector
4. eDP/display cable connector
6. Touchpad cable connector
8. Memory modules
10. USH board connector
12. WWAN connector
Removing and installing components
61