Table of Contents
Advertisement
3. Remove the battery cable away from the battery.
Installing the battery cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Steps
1. Align and route the battery cable through the routing guides on the battery.
2. Connect the battery cable to the connector on the battery.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
microSD
card.
4. Install the
SIM
card.
5. Follow the procedure in
or
4-cell
battery.
after working inside your
computer.
Removing and installing components
45
Advertisement
Table of Contents
