Installing The Fork Legs - Husqvarna FC 450 Heritage 2023 Owner's Manual

11.12

Installing the fork legs

SERVICE WORK ON THE CHASSIS 11
(Rockstar Edition)
–
Loosen screws
–
Loosen screws
A01068-10
Main work
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
F03665-11
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
(All models apart from Rockstar Edition)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
A01189-11
triple clamp
(Rockstar Edition)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
A01068-11
triple clamp
3
. Remove the left fork leg.
4
. Remove the right fork leg.
1
of the right fork leg is positioned to
of the left fork leg faces the front.
2
.
M8
3
.
M8
2
.
M8
3
.
M8
17 Nm (12.5 lbf ft)
12 Nm (8.9 lbf ft)
17 Nm (12.5 lbf ft)
12 Nm (8.9 lbf ft)
61