Installing The Front Wheel - Husqvarna FC 450 Heritage 2023 Owner's Manual

13 WHEELS, TIRES
13.2
110

Installing the front wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
A01188-10
A01273-10
H01890-10
(All models apart from Rockstar Edition)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
A
faces of the spacers.
Long-life grease (
–
Insert the spacers and brake disc guard.
–
Clean and lightly grease the wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few
times firmly.
The fork legs straighten.
–
3
Tighten screws .
Guideline
Screw, fork stub
(Rockstar Edition)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
A
faces of the spacers.
Long-life grease (
–
Insert the spacers.
–
Clean and lightly grease the wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
1
and contact sur-
p. 161)
p. 161)
2
.
M20x1.5 35 Nm (25.8 lbf ft)
p. 55)
M8 15 Nm (11.1 lbf ft)
1
and contact sur-
p. 161)
p. 161)