Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.10
11.11
60
Installing the right side panel
A01196-10
Removing the fork legs
A01262-10
A01189-10
–
Position right side panel
–
Apply some pressure to the side panel in area
B
it. Attach it in area
and push it towards the rear.
Guideline
Hold the side cover in area
Info
If the side panel was only folded out, the side panel
does not need to be hooked in again in area
–
Press the side panel in area
Guideline
Ensure that the side panel is correctly hooked in to
A
B
C
areas
,
, and
.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and the brake line to hang loosely to
the side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
(All models apart from Rockstar Edition)
–
3
Loosen screws
. Remove the left fork leg.
–
4
Loosen screws
. Remove the right fork leg.
1
.
A
and attach
A
from the rear.
A
C
into the rubber bushing.
p. 55)
(
p. 108)
.
Advertisement
Table of Contents
