11.8
Installing the engine guard (Rockstar Edition, FX 450)
11.9
Removing the right side panel
SERVICE WORK ON THE CHASSIS 11
–
Position the engine guard on the frame.
–
Mount screws
Guideline
Remaining screws,
chassis
–
Mount screws
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
A01105-11
–
Unhook right side panel
B
area
and unhook and detach in area
Info
If the side panel does not have to be completely
removed, the side panel can remain hooked into
C
area
–
Take the right side panel off.
A01195-10
1
, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
2
with bushings, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
1
A
in area
, slide forward in
C
and can just be folded open.
.
59