Husqvarna FC 450 Heritage 2023 Owner's Manual page 66

11 SERVICE WORK ON THE CHASSIS
64
–
Position the upper triple clamp and handlebar.
–
Mount screw
Guideline
Screw, top steering
head
S05332-11
–
Position the fork legs.
Air bleeder screw
tioned to the front.
Valve
Info
Grooves are milled into the side of the upper end
of the fork legs. The second milled groove (from
the top) must be flush with the upper edge of the
F03764-10
upper triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
–
Tighten screws
Guideline
Screw, bottom
triple clamp
A01198-10
–
Tighten screw
Guideline
Screw, top steering
head
A01191-11
–
Mount and tighten screw
Guideline
Screw, top
steering stem
A01191-10
2
, but do not tighten it yet.
M20x1.5
3
of the right fork leg is posi-
A
of the left fork leg faces the front.
4
.
M8
2
.
M20x1.5
5
.
M8 20 Nm (14.8 lbf ft)
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
®
Loctite 243™