10 TUNING THE CHASSIS
10.14
48
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
A01167-10
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Observe the accompanying instructions for Husq-
varna Motorcycles technical accessories.
–
Adjust the air pressure as specified.
Guideline
Air pressure (All EU models)
Air pressure (All US models
apart from Rockstar Edition)
Air pressure (FX 450)
Air pressure (Rockstar Edi-
tion)
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from
the hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically
after 80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way to the stop.
Info
1
Adjuster
is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
10.4 bar (151 psi)
10.7 bar (155 psi)
10.1 bar (146 psi)
10.9 bar (158 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
p. 55)