Table of Contents
Advertisement
11.5
Removing the fork protector
11.6
Installing the fork protector
SERVICE WORK ON THE CHASSIS 11
Universal oil spray (
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
(All models apart from Rockstar Edition)
–
Remove screws
–
Remove screws
–
Remove screws
(Rockstar Edition)
–
Remove the front wheel.
A01213-10
–
Remove screws
–
Remove screws
–
Remove screws
S05599-10
(All models apart from Rockstar Edition)
–
Position the fork protector on left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws
–
Position the fork protector on the right fork leg. Mount
A01213-11
and tighten screws
Guideline
Remaining screws,
chassis
p. 162)
p. 57)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
(
p. 108)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6
10 Nm (7.4 lbf ft)
.
3
.
M6
10 Nm (7.4 lbf ft)
p. 55)
57
Advertisement
Table of Contents
