Lubricating The Steering Head Bearing; Removing The Start Number Plate; Installing The Start Number Plate; Removing Front Fender - Husqvarna FC 450 Heritage 2023 Owner's Manual

11.17

Lubricating the steering head bearing

11.18

Removing the start number plate

11.19

Installing the start number plate

11.20

Removing front fender

SERVICE WORK ON THE CHASSIS 11
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated
in the course of removal and installation of the lower
triple clamp.
H02387-01
–
Remove screw
–
Unhook the start number plate from the brake line and
remove it.
A01216-10
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
A01216-11
Preparatory work
–
Remove the start number plate. (
( p. 62)
( p. 63)
1
.
A
on the start number
p. 69)
1
.
69